AirLive SNMP-GSH2004L - Manual (Page 41)

4. Web Management
AirLive SNMP-GSH2004L User’s Manual 36
„
State:
Show the status on the port.
„
Protocol Enabled:
Controls whether Loop Detection is enabled on this switch port.
When Port No is chosen and enable port' s Loop detection, the port can detect loop
happens and port will be Locked. If Loop did not happen, port maintains Unlocked.
„
Unlock port:
When ticking the port, port locked will be opened and turned into unlocked. If not ticking the
port, Port maintains locked.
4.4.12 Broadcast Strom Protection
When the broadcast packets received by the switch exceed the threshold configured, the
port will be blocked for a period of time which can be set. After a configured time, the switch