2N Omega series - VoIP manual v1.4 - Manual (Page 74)

74

Text – enter the name of short dialling item to be presented to the user and in the
ringing tables.

Number – enter the „comma‟ character “,“, which represents a pause, to make sure that
a pause with no further dialling will be dialled into the trunk specified in the Call type.
It will be decided in the VoIP section (Ethernet module) according to the CLIP whether
the calling user will be assigned ME. If CLIP shouldn‟t match to defined incoming ME
numbers , the call will be routed to DISA. In that case, caller would have two options -
to dial in the required VoIP phone or wait for the VoIP phone designated as the
operator.

Call type – select the bundle (trunk) of VoIP lines (voice channels).
Create a ringing table and add it to the incoming line.
Use the External lines/Ringing menu to create a ringing table.
Assign the port of the internal/virtual line to which the calls are to be accounted to
the incoming lines in the External lines/Transit call identification menu.