2N Omega series - VoIP manual v1.4 - Manual (Page 39)

39
4.4.6. SIP / H.323 Switching
If you are not licensed to use the SIP and H.323 protocols simultaneously,
you have to choose one. The default module protocol is H.323.
To toggle the protocols, use the Switch to SIP/Switch to H.323 option in the
following menu. Doing this you also initiate the module restart.
4.5. Communication Line Setting
To define line parameters, use the Devices menu in the Telephony services
tag. You can add and modify the VoIP lines (SIP, H.323 and DISA). To set a line
type, select the appropriate Devices menu item.
Be sure to establish one SIP or H.323 line at least to make your
2N
®
OMEGA Lite Ethernet module work properly.
4.5.1. SIP
A clearly arranged table of available SIP lines is displayed on the initial SIP
line setting screen: