2N Omega series - VoIP manual v1.4 - Manual (Page 65)

65
Push to set the conditions.

Outgoing ME enabled – tick off to enable a ME outgoing call.

Incoming ME enabled – tick off to enable ME in an incoming call.

Allow sending SMS – tick off to enable sending SMS on missed calls (via the first
GSM port).

SMS at no answer text (%n for number) – type the SMS text to be sent after a
missed call. %n stands for the calling number.

ME SIP route – enter the IP address including the port on the device that “controls” the
ME function. As a rule, the own Ethernet module IP address is used.

ME DISA line – select the DISA line to be used for ME.
Push for confirmation.