2N Omega series - VoIP manual v1.4 - Manual (Page 72)

72
4.12.4.4. SIP Proxy
Here assign prefixes to the SIP Proxy.
Push to create a SIP Proxy rule.

If prefix – select which prefix shall affect this rule. Here the rule applies to prefix „0‟.

Strip – define how many digits are to be removed. Here none is removed.

Add – define which numbers are to be added.

Do action – define which action is to be performed. Select „connect to LCR‟.

With parameter – define which line is to be used.
Take the same steps to create the condition for prefix „4‟.
Push for confirmation.