2N Omega series - VoIP manual v1.4 - Manual (Page 40)

40
The following items are displayed in the table columns:

Line ID
– internal line identification used by the module firmware.
Click on the number to display the line detail.

SIP server – IP address of the SIP proxy to which the line is being
registered.

Phone number
– line calling number.

Description
– any text describing the meaning of a line.
Click on the symbol to move to the line setting detail for making
changes.
The symbol is used for clearing a line. To clear a line, you can also tick
off the checkbox in the last column of the table and click on Remove selected item
.
There is an Add SIP line icon below the table . Click on it to
display the line defining form.
4.5.2. SIP Line Parameters
lick on the Add icon below the form to add a new line. To modify an existing
line, click on Change, thus confirming the entered data and requesting the
execution of the selected operation.
There are also Default and Back icons below the form. The first one restores
the default value of all fields and the second one returns you to the previous
screen.