2N Omega series - VoIP manual v1.4 - Manual (Page 62)

62
4.12. Mobility Extension
Here the Mobility Extension settings for VoIP phones are described. An
authorised Mobility Extension user can make calls as from a VoIP extension. Use
the FLASH = 7* command during a call for call transfer. Press 9# to exit the current
call, remaining connected to the VoIP and capable of further dialling.
4.12.1. User Settings
Enable the Mobility Extension function and enter the telephone number for
the user.
Enter:

Outgoing ME enabled – enable the use of outgoing Mobility Extension, in the case of
call to this VoIP user (extension)

Outgoing ME number – the telephone number (including a prefix ) to be called in case
of an outgoing Mobility Extension call (rings simultaneously with the VoIP extension)