2N Omega series - VoIP manual v1.4 - Manual (Page 104)

104
6.1.6.3. User Module Setting
Push Setup to set the User module parameters.
Trace
Enable/set the following:

Trace – enable the creation of the User module LOG communication.

Erase trace at start – enable the deletion of the User module LOG
communication upon the XAPI server start.

File size limit
– limit the LOG file size (*.trc). When the limit is exceeded, the
oldest data are overwritten.
Life
Enter the following:

Close at idle longer than
– define the idle time after which the application shall
be closed. Most applications are provided with protection and thus retain the
0min = no forced disconnection setting unless provided otherwise.