2N Omega series - VoIP manual v1.4 - Manual (Page 17)

17
4. Ethernet Module Configuration
The 2N
®
OMEGA PBX Ethernet module has the following factory settings:
Serial console communication port:
Bits per second: 115200
Data bits: 8
Parity: none
Flow control: none
Use the same values for the COM port to be created.
Network parameters:
IP address: 192.168.1.1
Network mask:
255.255.255.0
The module may be configured in two ways:
1) Connect the module to the PC using a USB cable and set the basic
network parameters by means of some communication software, e.g. the
HyperTerminal. Then use a web browser to complete the setting.