2N Omega series - VoIP manual v1.4 - Manual (Page 29)

29
The form contains the following fields:

Enable DHCP – indicates whether the network parameters can be
obtained from the DHCP, or have to be entered manually.

IP address – module IP address. If the dynamic address
assignment by the DHCP is activated, the value may not be
changed manually.

Network mask
– network mask. If the dynamic address
assignment by the DHCP is activated, the value may not be
changed manually.

Gateway – default router IP address. It is used for routing data
beyond the network limits. If the dynamic address assignment by
the DHCP is activated, the value may not be changed manually.