2N Omega series - VoIP manual v1.4 - Manual (Page 45)

45

Gatekeeper finding method
– determines how to find an
available Gatekeeper. Either enter a static address or search the
network for the address.

Gatekeeper IP address – here enter the Gatekeeper IP address
if the Gatekeeper address is not network-searched.

Gatekeeper name
– here enter the Gatekeeper name for line
login. This parameter is optional.

Gateway address – here enter the gateway address if you have
selected the Gateway calling method.

Gateway prefix(es)
– prefixes for the gateway login to the
Gatekeeper.

Endpoint type
– the gateway can login to the Gatekeeper either
as a Gateway with a prefix (all calls starting with the prefix are
routed through the module) or as a Terminal (virtual telephone).

Displayed name – text to be displayed to the called line.

Numbers
– numbers of the line working in the Terminal mode.

Listen port
– TCP port on which the line receives H.323 calls.

Disable Fast start
– select this item to disable the Fast start
method. This method provides a faster speech channel start
where the H.323 protocol is used.

Disable Early media start
– select this item to disable the Early
media start method. This method establishes the speech
channels before the call has been set up completely by signalling.
It is useful for transmission of GSM progress tones.

DTMF type – choose the DTMF tones to be supported; either
numbers only (select Signal), or alphanumeric characters (select
Alphanum).

Transfer method
– select either Call forwarding or H.452.2 call
transfer.

Codecs
– a list of codecs to be provided by the gateway for voice
channel negotiations.

Description – any text that describes the meaning of a line.