8 hydraulic oil, Hydraulic oil -3, Mobilfluid 424 specs -3 – JLG 450A_AJ Series II Service Manual User Manual
Page 19: Mobil dte 13m specs -3, Ucon hydrolube hp-5046 -3, Mobil eal h 46 specs -3

SECTION 1 - SPECIFICATIONS
3121290
– JLG Lift –
1-3
1.8
HYDRAULIC OIL
NOTE:
Hydraulic oils must have anti-wear qualities at least to API
Service Classification GL-3, and sufficient chemical stabil-
ity for mobile hydraulic system service. JLG Industries rec-
ommends Mobilfluid 424 hydraulic oil with an SAE
viscosity index of 152.
NOTE:
When temperatures remain consistently below 20 degrees
F. (-7 degrees C.), JLG Industries recommends using Mobil
DTE13.
ASIDE FROM JLG RECOMMENDATIONS, IT IS NOT ADVISABLE TO MIX OILS OF DIF-
FERENT BRANDS OR TYPES. THEY MAY NOT CONTAIN REQUIRED ADDITIVES OR BE
OF COMPARABLE VISCOSITIES. IF USE OF HYDRAULIC OIL OTHER THAN MOBILFLUID
424 IS DESIRED, CONTACT JLG INDUSTRIES FOR PROPER RECOMMENDATIONS.
Table 1-11. Hydraulic Oil
Hydraulic System Operating
Temperature Range
S.A.E. Viscosity
Grade
+0° to + 180° F
(-18° to +83° C)
10W
+0° to + 210° F
(-18° to +99° C)
10W-20, 10W30
+50° to + 210° F
(+10° to +99° C
20W-20
Table 1-12. Mobilfluid 424 Specs
SAE Grade
10W30
Gravity, API
29.0
Density, Lb/Gal. 60°F
7.35
Pour Point, Max
-46°F (-43°C)
Flash Point, Min.
442°F (228°C)
Viscosity
Brookfield, cP at -18°C
2700
at 40° C
55 cSt
at 100° C
9.3 cSt
Viscosity Index
152
Table 1-13. Mobil DTE 13M Specs
ISO Viscosity Grade
#32
Specific Gravity
0.877
Pour Point, Max
-40°F (-40°C)
Flash Point, Min.
330°F (166°C)
Viscosity
at 40° C
33cSt
at 100° C
6.6 cSt
at 100° F
169 SUS
at 210° F
48 SUS
cp at -20° F
6,200
Viscosity Index
140
Table 1-14. UCon Hydrolube HP-5046
Type
Synthetic Biodegradable
Specific Gravity
1.082
Pour Point, Max
-58°F (-50°C)
pH
9.1
Viscosity
at 0° C (32° F)
340 cSt (1600SUS)
at 40° C (104° F)
46 cSt (215SUS)
at 65° C (150° F)
22 cSt (106SUS)
Viscosity Index
170
Table 1-15. Mobil EAL H 46 Specs
Type
Synthetic Biodegradable
ISO Viscosity Grade
46
Specific Gravity
.910
Pour Point
-44°F (-42°C)
Flash Point
500°F (260°C)
Operating Temp.
0 to 180°F (-17 to 162°C)
Weight
7.64 lb. per gal.
(0.9 kg per liter)
Viscosity
at 40° C
45 cSt
at 100° C
8.0 cSt
Viscosity Index
153