JLG 1100SB Service Manual - Manual (Page 24)

SECTION 1 - SPECIFICATIONS
1-8 – JLG Lift – 3121265
NOTE: Machines may be built with either Bonfiglioli or Reg-
giana Riduttori wheel drive hubs.
4. A: Wheel Drive Hub - Bonfiglioli
Lube Point(s) - Level/Fill Plug
Capacity - 2.1 quarts (2 liters) ± 10%
Lube - EPGL
Interval - Change after first 150 hours then every
1200 hours of operation
Comments - Place Fill port at 12 o’clock position and
Check port at 8 o’clock position. Pour lubricant
into fill port until it just starts to flow out of check
port.
B: Wheel Drive Hub - Reggiana Riduttori
Lube Point(s) - Level/Fill Plug
Capacity - 0.5 quarts (0.5 liters) ± 10%
Lube - EPGL
Interval - Change after first 150 hours then every
1200 hours of operation
Comments - Place Fill port at 12 o’clock position and
Check port at 3 o’clock position. Pour lubricant
into fill port until it just starts to flow out of check
port.
5. Hydraulic Return Filter
Lube Point(s) - Replaceable Element
Interval - Change after first 50 hours and every 300
hours thereafter or as indicated by condition indi-
cator
6. Hydraulic Charge Filter
Lube Point(s) - Replaceable Element
Interval - Change after first 50 hours and every 300
hours thereafter or as indicated by condition indi-
cator.