Eppendorf Galaxy Gas Analyzer - Manual (Page 50)

Galaxy® Gas Analyzer — Operating manual
50
13 Optional event log
13 Optional event log
The following events are recorded in the instrument’s event log. The event log can only be
downloaded using the optional Analyzer Data Manager (please refer to the Analyzer Data
Manager manual for further details).
Event Data
Cold Start/Restart Type of start (MCUSR, boot_key)
Firmware Version Description
Set Time Before and After
Set Date Before and After
Re-flash requested Type
Restore to factory settings Type
Comms clear memory Type 0=Readings, 1=Event Log
Change contrast Before and After
Change flow fail current limit Before and After
Battery less than critical voltage Critical, Actual
RTC date/time invalid None
Factory calibration invalid or overdue Date, difference
Service invalid or overdue Date, difference
Power on self-test, sensor out of range Channel, reading, limit
User calibration set zero OK Before, After
User calibration set span OK Target, Before, After
User calibration set zero failed Target, Reading
User calibration set span failed Target, Reading
Attempt to store when readings memory full Max
Readings memory nearly full Limit, Actual
Change logging mode Status, Interval, Pump time
Change logging mode ID ID
Flow fail current limit exceeded Limit, Actual
13
Op
tional event log