Eppendorf Galaxy Gas Analyzer - Manual (Page 18)

Galaxy® Gas Analyzer — Operating manual
18
Time & Date
The Set Time & Date screen allows you to check or reset the instrument's internal clock. The
current time/date are appended to every stored reading.
1- and 2- (see Fig. 10 on p. 18) indicate the numeric key to set each function (1 for Time, 2 for
Date).
Abb. 10: Set Time & Date screen
Fig. 10: Set Time & Date screen
To access the Set Time & Date screen from the Main screen:
1. Press the Menu key on the instrument panel.
2. Press numeric key 2 to display the Utilities Menu.
3. Press numeric key 1 to display the Set Time & Date screen.
To change the Time, press the numeric key 1. The time is indicated in hours:minutes:seconds,
and the hours are indicated in “military” time, i.e., from 00-23.
To change the Date, press the numeric key 2. The factory default date setting is indicated in
European style: day/month/year. You can use the Settings screen to change this to month/day/
year (see Settings on p. 20).
Contrast
The Adjust Contrast screen (see Fig. 11 on p. 18) allows you to adjust the instrument’s screen
contrast, to compensate for changes in ambient temperature or lighting. The default setting is 0.
To access the Adjust Contrast screen from the Main screen:
1. Press the Menu key on the instrument panel.
2. Press numeric key 2 to display the Utilities Menu.
3. Press numeric key 2 to display the Adjust Contrast screen:
Abb. 11: Adjust Contrast Screen
Fig. 11: Adjust Contrast Screen
Hint!
Press the right-hand soft key at any time to exit this screen and return to the Utilities Menu.
Hint!
If you take the instrument across time (or date) zones or your location changes to daylight
savings time, you will need to change the instrument’s time (or date) manually.
5
Operation