Eppendorf Galaxy Gas Analyzer - Manual (Page 26)

Galaxy® Gas Analyzer — Operating manual
26
Filter data
Use this option to refine/filter the range of readings displayed by ID or particular date ranges.
To access the Filter screen from the Main screen:
1. Press the Menu key on the instrument panel.
2. Press the numeric 4 key to select View Data.
3. Press the left-hand More soft key to display the Options menu.
4. Press the numeric 2 key to open the Filter screen:
Abb. 22: Filter Screen
Fig. 22: Filter Screen
5. Press numeric key 1 to select Any ID to display data saved to your ID code. You will be
prompted to press numeric key 2; the screen will then say 2-ID=00000000. Press the numeric
keys that correspond to your 8-digit ID code number, then press the middle (Accept) soft key.
6. Alternately, you may press numeric key 3 to select from a range of Date options:
7. Press numeric key 3, 4 or 5 to select one of the Date options, then use the numeric keys to
enter the defining date(s).
8. Press the middle (Accept) soft key each time you enter a desired date.
9. Press the right-hand (Exit) soft key to return to the Filter screen.
10. Press the Exit soft key again to return to the Options screen.
Go to data
Use this option to jump to the first or last reading in the memory or to skip to any other reading.
To access the Go to Reading screen from the Main screen:
1. Press the Menu key on the instrument panel.
2. Press the numeric 4 key to select View Data.
3. Press the left-hand More soft key to display the Options menu.
4. Press the numeric 3 key to open the Go to Reading screen:
Hint!
3-Date Between: this option allows you to enter two defining dates, a starting and ending date, to
represent the range of records you wish to view.
4-Aft 00/00/00: this option allows you to enter the defining date after (later than) which you wish
to view records.
5- Bfr 00/00/00: this option allows you to enter the defining date before (earlier than) which you
wish to view records.
5
Operation