Eppendorf I-26R Large Stackable Incubator Shakers User Manual
Page 9

9
New Brunswick
Operating Manual
I-26/26R Incubator Shaker
LED DISPLAY
Indicates speed, temperature, running time alarm conditions, and
displays readout of internal clock (actual accumulated operating
time). Character height: 14.3 mm (9/16 in)
RS 232
Provides access for remote data logging
SETPOINT
RETENTION
All setpoints and operating status are retained in non-volatile
memory
AUTOMATIC
RESTART
Automatic restart after power is restored, indicated by flashing
display
STACKING
Up to three units may be stacked; the second and third units require
stacking kit(s).
DRIVE
Triple-eccentric counterbalanced drive with nine permanently
lubricated ball bearings
DRIVE MOTOR
Solid-state brushless DC motor.
SAFETY
An independent mechanical sensing “tilt switch” shuts off the motor
in an unbalanced condition. Drive Interrupt shuts off power to shaker
when door opens. Acceleration/deceleration circuit prevents sudden
starts and stops, minimizing both splashing and mechanical
damage.
ELECTRICAL
REQUIREMENTS
100 Volts, 50/60 Hz
120 Volts, 60 Hz
230 Volts, 50 Hz
I-26: 800 VA per shaker
I-26R: 1500 VA per shaker
SAFETY
REGULATORY
STANDARDS
UL61010A-1
UL61010-2-010
CAN/CSA-C22.2 No 1010.1
CAN/CSA-C22.2 No 1010.2.010
CE REGULATORY
STANDARDS
See DECLARATION OF CONFORMITY
OVERALL
DIMENSIONS
Width
Depth (Front to Back)
Height (excluding
optional base)
Single Unit
128.3 cm (50.5 in)
77 cm (30.32 in)
70 cm (27.56 in)
Two Units
128.3 cm (50.5 in)
77 cm (30.32 in)
133.5 cm (52.56 in)
Three Units
128.3 cm (50.5 in)
77 cm (30.32 in)
197 cm (77.56 in)
CHAMBER
DIMENSIONS
86.4 cm (34 in) Wide X 58.4 cm (23 in ) Deep X 39.4 cm (15.5 in)
High clearance above platform
PLATFORM
Aluminum, 46 cm X 76 cm (18 in X 30 in)
WEIGHT
I-26: 167.8 kg (370 lbs)
I-26R: 181.5 kg (400 lbs)
FUSES
Two 8.0A 250V, Slo-Blo
®
2.3 Certifications
The I-26 and I-26R have been tested to comply with UL and CAN/CSA electrical safety
standards (see “Safety Regulatory Standards” in the specifications table). As attested in
the CE Declaration of Conformity reproduced on the following page, they also conform
to the appropriate EU standards.