Eppendorf I-26R Large Stackable Incubator Shakers - Manual (Page 46)

46
I-26/26R Incubator  Shakers M1324-0050 Operating Manual
The 43.2 cm (17 in) Tall Base is made of the 10.2 cm (4 in) and 33.0 cm (13 in)
bases, bolted together at the factory.
10.3.6 Stacking Kit for I-26/26R
Description Part Number
Stacking hardware (to stack two units) M1324-0500
10.3.7 Optional Handles
Description Part Number
Screw-in handles (4 pieces in kit) M1282-5042
Each shaker has two threaded holes at the bottom of both side panels. You can
screw the optional handles into these holes. They are useful for lifting the shaker
onto an optional base, for example.
CRUSH WARNING!
Make sure that any persons who will use these handles (for minor
moves or lifts only) take proper precautions to protect their hands, feet
and backs from injury.
Do not use the screw-in handles to lift the shaker if it is fastened to a base.