5i i – Eppendorf I-26R Large Stackable Incubator Shakers User Manual
Page 14
![background image](/manuals/551430/14/background.png)
14
I-26/26R Incubator Shakers M1324-0050
Operating Manual
5
5
I
I
N
N
S
S
T
T
A
A
L
L
L
L
I
I
N
N
G
G
T
T
H
H
E
E
I
I
-
-
2
2
6
6
/
/
2
2
6
6
R
R
CRUSH WARNING!
Do not attempt to lift the I-26/26R by hand.
Always use a lifter or other suitable equipment when raising or handling
the unit.
5.1
Tools Required for Installation
To install the I-26/26R on an optional base and/or to stack I-26/26R units, the following
tools will be needed:
Number 2 Phillips head screwdriver
Level, 25.4 cm (10 in)
Two adjustable wrenches
Forklift or other lifting equipment to lift more than 168 kg (370 lb)
Metal leveling shims
5.2
Leveling a Single Shaker
Do NOT use feet if you are stacking shakers or adding a base.
Make sure that the shaker is placed on a level surface and that all four feet are solidly on
the surface. If the shaker is not level, adjust the feet as needed to achieve leveling:
1. Immobilize the top lock nut against the unit with one wrench whenever you adjust
the foot, to keep the threaded stud from falling out.
Figure 2: Adjustable Foot
BOTTOM OF
UNIT
LOCK NUT
FLATS FOR WRENCH
FOOT