Eppendorf I-26R Large Stackable Incubator Shakers - Manual (Page 25)

25
New Brunswick Operating Manual
6.5 Function Indicators
Four function indicator lights are located to the right of the
LED DISPLAY . They indicate
the current parameter(s) being displayed:
 C Interior chamber temperature. Can be set from
4°C to 60°C, when in
SET MODE , using the
▲(UP), ▼(DOWN) arrow key. It indexes at
0.1°C increments unless the key is pressed for
4 seconds, after which it indexes in 1°C
increments.

RPM Revolutions per minute. When in SET MODE ,
use the ▲(UP), ▼(DOWN) arrow key to change
the speed. It indexes at 1 RPM increments
unless the key is pressed for 4 seconds, after
which it indexes by increments of 10 RPM.

HRS Time remaining in a timed run. Can be set
from 0.1 to 99.9 hours, in 0.1 increments or, if
the
▲(UP), ▼(DOWN) arrow key is pressed for
4 seconds, in increments of 5 hours.
The countdown begins when the
START/STOP
key is pressed. If the START/STOP key is
pressed again, the shaking stops (but
temperature is maintained) and the timer
pauses until the
START/STOP key is pressed
again.
When a timed run ends, the
HRS indicator will
blink. Press the SELECT key and change to
another function to turn off this indicator.

MUTE This feature is controlled by the SELECT key.
When activated, the audible alarm is muted,
remaining so until it is reactivated. If
MUTE is
activated when the shaker is turned off using
the
ON/OFF switch, MUTE will be engaged
when it is powered up again. To activate (or
deactivate) the
MUTE function, press the
SELECT key until the MUTE indicator
illuminates; press the ▲ or ▼ KEY to display
ON or OFF , as desired; then press SELECT .