Eppendorf I-26R Large Stackable Incubator Shakers - Manual (Page 24)

24
I-26/26R Incubator  Shakers M1324-0050 Operating Manual
6.3 User Interface Keys

START/STOP This key is used to start or stop the shaker. It will
also activate or stop the timer when a timed run is
desired.

SELECT This key is used to change the displayed parameter.

▲ (UP), ▼(DOWN) These keys are used to adjust the setpoint of a
displayed parameter up or down. They also allow
the user to enter the
SET MODE for setpoint
changes.
6.4 Status Indicators
Four status indicator lights are located to the left of the
LED DISPLAY . They are:

SET Indicates that the shaker is in the SET MODE ,
when setpoints are being displayed and can be
altered. This is activated by the
SELECT key
or by pressing the ▲(UP), ▼(DOWN) arrow.

POWER Illuminates and blinks during power up or if
power is interrupted during a run. Press the
SELECT key and change to another function to
turn off this indicator.

HEAT Illuminates to indicate that the heater is on.

TIME Indicates that the timer is in operation. The
shaker can be programmed to run for a preset
time from 0.1 to 99.9 hours. The timer can be
disengaged without stopping an ongoing run.