Eppendorf I-26R Large Stackable Incubator Shakers - Manual (Page 44)

44
I-26/26R Incubator  Shakers M1324-0050 Operating Manual
10.3 Accessories
When ordering accessories, please provide the Model Number and Serial Number of your
shaker. This information is on the
ELECTRICAL SPECIFICATION PLATE , located on the
rear panel of the unit. The Serial Number is also labeled in the lower right corner of the
front panel, below the chamber door seal.
10.3.1 Available Platforms, 46 x 76 cm (18 x 30 in)
Dedicated Platforms include flask clamps, pre-installed:
Application Capacity Part Number
125 ml Erlenmeyer Flasks 60 M1324-9905
250 ml Erlenmeyer Flasks 40 M1324-9906
500 ml Erlenmeyer Flasks 24 M1324-9907
1 L Erlenmeyer Flasks 15 M1324-9908
2 L Erlenmeyer Flasks 12 M1324-9909
2.8 L Erlenmeyer Flasks 6 M1324-9910
A Sticky Pad Platform (P/N M1324-9911), eliminates the need for flask clamps.
Sticky Pad (P/N M1250-9700) sold separately.
A Universal Platform (P/N M1324-9904) provides maximum flexibility for
mixing various sized glassware on a single platform. Flask clamps, test tube racks
and accessories sold separately.
10.3.2 Flask Clamps for Universal Platforms
Clamp Size Part Number
10 ml Erlenmeyer Flask ACE-10S
25 ml Erlenmeyer Flask M1190-9004
50 ml Erlenmeyer Flask M1190-9000
125 ml Erlenmeyer Flask M1190-9001
250 ml Erlenmeyer Flask M1190-9002
500 ml Erlenmeyer Flask M1190-9003
1 L Erlenmeyer Flask ACE-1000S
2 L Erlenmeyer Flask ACE-2000S
2.8 L Fernbach Flask ACFE-2800S
10.3.3 Replacement Clamp Hardware Kits
New Brunswick Flask Clamps come complete with the proper hardware kits.
However, from time to time you may want to obtain some additional Hardware
Kits. The following table identifies the proper screws for your shaker application
by reference to the head style and size.