Eppendorf epMotion 96 - Manual (Page 65)

65
Maintenance
epMotion ® 96
English (EN)
8 Maintenance
8.1 Replacing fuses
The fuse holder is located between the mains connection socket and the mains power switch. The fuses
may only be replaced with the same type of fuse.
1. Disconnect the mains plug.
2. Pull the fuse holder out completely.
3. Replace the defective fuse.
4. Insert the fuse holder.
8.2 Cleaning
1. Wipe the painted parts and the aluminum surfaces with a cloth and mild detergent.
2. Polish with a dry cloth.
DANGER! Electric shock.
 Switch off the device and disconnect the power plug before starting maintenance or
cleaning work.
DANGER! Electric shock as a result of penetration of liquid.
 Switch off the device and disconnect the power plug before starting cleaning or
disinfection work.
 Do not allow any liquids to penetrate the inside of the housing.
 Do not spray clean/spray disinfect the housing.
 Only plug the device back in if it is completely dry, both inside and outside.
NOTICE! Damage from the use of aggressive chemicals.
 Do not use any aggressive chemicals on the device or its accessories, such as strong and
weak bases, strong acids, acetone, formaldehyde, halogenated hydrocarbons or phenol.
 If the device has been contaminated by aggressive chemicals, immediately clean it by
means of a mild cleaning agent.
Clean the device at least every 4 weeks