Eppendorf epMotion 96 - Manual (Page 44)

Operation
epMotion
® 96
English (EN)
44
6.10.2 Dispensing and mixing liquid
Prerequisites
• Liquid has been aspirated.
• Destination vessel is available.
1. Put the destination vessel onto the lifting table and move the lifting table into working position.
2. Set the mixing volume for the mixing cycles.
3. Press Dispense .
The set liquid volume is dispensed.
The mixing volume is automatically aspirated and dispensed.
6.11 Mode Manual Pipette – Dispensing liquid manually
Manually determining the liquid volume for aspirating and dispending.
Abb. 6-4: Mode Manual Pipette
Fig. 6-4: Mode Manual Pipette
Parameter Value Range of values
Speed aspirate Setting the speed of the liquid aspiration. 1 – 9
Speed dispense Setting the speed of the liquid dispensing. 1 – 9
Max. Aspiration Volume Setting the dispensing volume in μL. 0.5 – 300 (increment of 0.1)
Current Volume Current volume is displayed. 0 – 300