Eppendorf epMotion 96 - Manual (Page 19)

19
Installation
epMotion ® 96
English (EN)
4 Installation
4.1 Preparing installation
1. Check the packaging for damage.
2. Carefully remove the device from the packaging.
3. Check that everything is included in the delivery.
4. Check the device for damage.
4.1.1 Complaints about damages
 Contact customer service.
4.1.2 Incomplete delivery
 Contact customer service.
4.2 Selecting the location
Select the device location according to the following criteria:
• Suitable power connection in accordance with the name plate.
• A bench with a horizontal and even work surface which is designed to support the weight of the device.
• A mat or table that is cushioned against vibrations.
• The location is protected from direct sunlight and drafts.
CAUTION! Risk of injury due to lifting and carrying heavy loads
The device is heavy. Lifting and carrying the device can lead to back injuries.
 Transport and lift the device with an adequate number of helpers only.
 Use a transport aid to transport the device.
Keep the packaging and the transport securing devices for later transport or storage.
Do not operate the device if there is visible damage to the device itself and/or to its packaging.
The mains/power switch and cutting unit of the mains/power line must be easily accessible
during operation (e.g, residual current circuit breaker).