Eppendorf epMotion 96 - Manual (Page 50)

Operation
epMotion
® 96
English (EN)
50
6.14.1 Creating and storing a program sequence
6.14.2 Editing the program sequence – Adding a mode at the end
1. Press New .
2. Enter the program name.
The program editor is opened.
3. Add modes.
4. Press
Save .
The program sequence is stored.
1. Press Add .
2. Select a mode and confirm with Select .
3. Choose the parameters for the selected mode and
confirm with back .
4. Press Save .
The program sequence is stored.