Eppendorf epMotion 96 - Manual (Page 28)

Software
epMotion
® 96
English (EN)
28
5.3.1 Entering or changing parameters
It is possible to change parameters using the iPod keypad.
5.3.2 Saving the parameter profile
Several parameter profiles can be created and stored in each mode.
1. Touch the parameter and hold it.
The key pad will fade in.
2. Change the parameter value.
3. Click on a blank section of the display to accept
the value.
1. Select the mode.
2. Set the parameters for the mode.
3. Select the desired number for the parameter
profile and hold it.
4. Confirm the prompt with Yes .
The parameter profile will be saved.
The number with the stored parameter profile is
displayed in black.