Aerovent IM-201 - Manual (Page 10)

10 Aerovent IM-201
7.0 RECOMMENDED SPARE PARTS
7.1 GENERAL
Spare parts may be ordered either from your Aerovent
representative or directly from the factory. Prices will be
quoted at time of order. Delivery can generally be made from
stock. To order spare parts, specify:
1. Fan model number
2. Fan serial number
3. Part description
4. Part number
5. Quantity required
The fan model and serial number is on the fan nameplate.
7.2 FPAC SPARE PARTS
It is recommended that the following spare parts be
stocked to service FPAC fans:
Part Description Part No. Qty. Req’d
Positioner (Pilot Ass’y) F10046301 1
Rotary Union F10016701 1
Cable Assembly F20034902 1
7.3 FPMC SPARE PARTS
It is recommended that the following spare parts be
stocked to service FPMC fans:
Part Description Part No. Qty. Req’d
Electric Actuator Input Signal:
4-20MA F10103502 1
120 VAC F100165 1
7.4 TOOLS AND MATERIALS
Special tools and materials are available from the fac-
tory to facilitate maintenance and repair of Aerovent fans.
These may be ordered by part description, part number, and
quantity required.
Part Description Part No. Qty. Req’d
Loctite Grade T Primer F10024401 6 oz. aerosol
Loctite 242 F10024402 100cc bottle
Loctite Stainless Steel PST F10024406 8.46 oz. tube
Gray Touch-up Paint P4332028 16 oz. aerosol
Tool, 8 mm hex x 3 ∕
8
F10024701 1
square adaptor for
AXICO blade shaft