MBW CG200 User Manual
Page 55
53
CATCHING WATER
The gutter is sloped to hold water.
SPILLING WATER
The gutter is sloped to allow water to flow out of gutter.
CATCH WATER
SPILL WATER
REBAR LOCATIONS
An opening in the front cover of hopper, to allow rebar to pass
through.
When rebar openings are required, three options exist.
A) If you are ordering a hopper, it can be modified while it is being manufatured. LocaĆ
tions for rebar must included on sketch or drawing.
B) A new front cover maybe ordered. Locations for rebar must be received.
C) You will modify your existing hopper.
Note: There is an additional charge for MBW Inc. to modify hoppers for rebar.
Note: A mold will only pass over rebar which is laid out in a straight line. You cannot
pass a curved piece of rebar through a straight mold.