MBW CG200 - Manual (Page 45)

43
MAINTENANCE & LUBRICATION CHART
ITEM SERVICE FREQUENCY CONTINUING
INSPECTION
INSPECTION STANDARDS
ENGINE OIL
ENGINE OIL FILTER
ENGINE OIL LEAKS
AIR CLEANER
FUEL FILTER
ENGINE COOLANT
BATTERY
FAN BELT
HYDRAULIC OIL
HYD. OIL FILTER
CONTROLS
BOLTS & NUTS
F Inspect-Check, add or adjust. Y Change. J Clean.
Y
CHANGE EVERY
75 HOURS
WITHIN RANGE ON DIPSTICK ADD
AS REQUIRED. CHANGE AFTER
FIRST 25 HOURS.
CHANGE WITH
ENGINE OIL
F
F
F
F
F
F
F
F
F
F
F
F
WATCH FOR SPOTS UNDER MAĆ
CHINE CHECK FITINGS & HOSES
CLEAN EVERY
100 HOURS
DUSTY CONDITIONS: CLEAN DAILY.
REPLACE AT 500 HOURS.
CHECK FILTER
BOWL FOR DIRT
CHANGE YEARLY 1/2" (13mm) BELOW FILLĆ
ER NECK BOTTOM
CHECK EVERY
100 HOURS
1/2" (13mm) ABOVE TOP
OF PLATES
CHECK EVERY
100 HOURS
3/8" (10mm) DEFLECTION
UNDER THUMB PRESSURE
CHANGE EVERY
1000 HOURS
WITHIN VIEW GAGE RANGE
ON TANK SIDE
CHANGE WITH
HYDRAULIC OIL
DAILY
PROPER FUNCTION
DAILY TIGHTEN AS REQUIRED
DAILY 75 100 500 1000
J Y
Y
Y
400
Y
Y
Y
PERIODIC MAINTENANCE CHART
ITEM LUBRICANT - FLUID TYPE QUANTITY
ENGINE OIL
LUBRICANT & CAPACITY CHART
API SERVICE SF/CC SAE 30 W 4.2 QUARTS (4.0 LITERS)
ENGINE COOLANT ANTIFREEZE-COOLANT MIXTURE 2.3 QUARTS (2.2 LITERS)
ENGINE FUEL #2 DIESEL FUEL 12.0 US GALLONS (45.4 LITERS)
HYDRAULIC OIL DEXRON-II ATF12.0 US GALLONS (45.4 LITERS)