Class1 118711 - TPG+ Governor - 118710 EXTERNAL - Manual (Page 20)

FORM-ENG-0018 REV A 05-27-03
PAGE 19 OF 30
TECHNICAL DATA SHEET
DATE 4/9/2009
PRODUCT GROUP THROTTLE CONTROL P/N 118710 REV 1.00
607 NW 27th Ave
Ocala, FL 34475
Ph: 352-629-5020 or 1-800-533-3569
Fax : 352-629-2902 or 1-800-520-3473 PRODUCT TOTAL PRESSURE GOVERNOR PLUS (TPG+) BY AMS
Manual P/N 118711
MENU ITEM DESCRIPTION DEFAULT MENU LEVEL
WARN PSI
Configure the yellow (warning) oil pressure setpoint
(only available when WARNINGS is set to Usr)
- 3*
CRIT PSI
Configure the red (critical) oil pressure setpoint
(only available when WARNINGS is set to Usr)
- 3*
XDCR Configures transducer type (300 or 600 psi) 300 3
FACTORY DFLT Resets parameters to factory default settings 3
GOV GAIN
Configures the RPM change requested per INC or DEC switch press
(Only available with message type ANLG)
15 4*
PRESS GAIN
Configures the pressure change requested per INC or DEC switch
press
3 PSI 4
DITHER
Configure the engine handshake
(Only available with message type PGN0)
NO 4*
LAG (∆PSI)
Controls the response of the pressure increase when the INC button
is held while in pressure mode.
(Not available with message type ANLG)
5 PSI 4*
PUMP HOURS Sets pump-engaged hours counter to a specified value N/A 4
BCM1 VER
Configures the Scania BCM version
(Only available with message type SCAN)
1 4*
SCANIA MODE
Configures the Scania engine control type: NORMAL or STIFF
(Only available with message type SCAN)
NORMAL 4*
* Option dependent on other menu selections made