AEM 30-3532 GM LS 24x Engines Layover - Manual (Page 2)

Rev A, 2013/02/05
Introduction
This Infinity Layover Harness was designed for the GM LS Engine 24x (manual transmission). The harness includes all
standard GM (or equivalent) connectors for direct plug-in fitment, and requires minimal wiring to complete the Power
Distribution Center (PDC) connections. The Infinity ECU is sold separately, and includes base configuration files for the
GM LS Engines 24x.
Overview
This Instruction Manual describes the harness layout, and provides instructions for installation of the harness on a vehicle.
All included connectors are listed in detail in the provided pinout. Also included are instructions for adding new circuits into
the Infinity connectors if additional sensors or outputs are desired. Please read the entire Instruction Manual prior to
beginning the installation.
Included Items
Connectors

Infinity C1 and C2

8 injectors

2 coil pack connectors, Bank-1 and Bank-2

Oil Pressure sensor

Crank Position Sensor

Cam Position Sensor

Knock connector (supports 2 sensors)

Alternator, 1-wire

Cable Throttle Body

Idle Air Control Valve, 4-wire stepper

UEGO Wideband 02 sensors, Bank-1 and Bank-2

Mass Air Flow sensor

Intake Air Temperature sensor

Engine Coolant Temperature sensor

Manifold Absolute Pressure sensor

Vehicle Speed Sensor

Reverse Lockout Solenoid

Cylinder head grounds, Bank-1 and Bank-2

AEMnet
Power Distribution Center

Bussmann Relay/Fuse Box with flying leads
Relays/Fuses

Relay, ISO 280 Micro Relay 35A/12V (5 ea)

Fuse, Mini ATM 30A (4 ea)

Fuse, Mini ATM 20A (1 ea)

Fuse, Mini ATM 10A (1 ea)

Fuse, Mini ATM 5A (4 ea)