AEM 30-2340 4-Channel Wideband UEGO AFR Controller - Manual (Page 7)

Page 7 10-2340 Rev 05 121012
To join the AEM network, connect the Deutsch male connector to the female connector
of another AEM devices in the network (Figure 6).
FIGURE 6. AEMnet Cable Connection
SERIES 2 EMS
When connecting to a Series 2 EMS, an AEMnet branch will have to be added to the
factory harness. AEM has several AEMnet to Series 2 EMS adapters available. See
Table 1 below for a list of the part numbers and corresponding Series 2 EMS units.
AEM Series 2 AEMnet CAN1L CAN1H
EMS Adapter P/N Pin Location Pin Location
30-6030 30-3430 C22 C21
30-6040 30-3431 A22 C2
30-6050 30-3432 D14 D10
30-6051 30-3432 D14 D10
30-6052 30-3432 D14 D10
30-6053 30-3432 D14 D10
30-6060 30-3432 C28 C29
30-6100 30-3433 11A 12A
30-6101 30-3433 11A 12A
30-6300 30-3434 75 13
30-6310 30-3431 77 87
30-6311 30-3431 57/77 67/87
30-6320 30-3435 33 13
30-6600 30-3436 42 12
30-6601 30-3436 42 12
30-6610 30-3437 12 69
30-6611 30-3437 12 69
30-6620 30-3437 57 40
30-6820 30-3438 B29 B28
30-6821 30-3438 B29 B28
TABLE 1. EMS Adapter P/N & Pin Locations