AEM 30-2340 4-Channel Wideband UEGO AFR Controller - Manual (Page 16)

Page 16 10-2340 Rev 05 121012
MODE 4 + MODE 5, and MODE 6 + MODE 7. Once this configuration is completed
correctly, the word “Matched” will appear next to the configuration chosen, as shown in
Figure 15. Read the notes under Configuration Notes and close the window.
FIGURE 15. Series 2 EMS / EMS – 4 Setup Wizard
Viewing Live Data
Right-click in a blank space in the AEMTuner software and choose Add Channel
Display. From the list of available channels, select all the ones associated with the
selected configuration mode, as listed in Table 5. Figure 16 shows the Channel display
for “Mode 1 + EBP Sensor.”
Configuration Mode Channels To Be Added
Mode 1 + EBP Sensor
UEGO M1 Cyl 1 UEGO M1 Cyl 2
UEGO M1 Cyl 3 UEGO M1 Cyl 4
UEGO M1 EBP Sensor
Mode 1 + Mode 2
UEGO M1 Cyl 1 UEGO M2 Cyl 1
UEGO M1 Cyl 2 UEGO M2 Cyl 2
UEGO M1 Cyl 3 UEGO M2 Cyl 3
UEGO M1 Cyl 4 UEGO M2 Cyl 4
Mode 4 + Mode 5
UEGO M4 Cyl 1 UEGO M5 Cyl 1
UEGO M4 Cyl 2 UEGO M5 Cyl 2
UEGO M4 Cyl 3 UEGO M5 Cyl 3
UEGO M4 Cyl 4 UEGO M5 Cyl 4