Brother DCP1200 - Manual (Page 75)

6 - 1 S C A N N I N G
6 6
Scanning
Using the Control Panel Keys (For Windows ®
95/98 and Windows NT ® 4.0 Only)
If you have connected a Macintosh G3 or iMac, the control panel keys will
not work with your PC. Please see “Using Brother TWAIN Scanner Driver
with Your Apple
® New Power Macintosh ® G3 or iMac”, page 6-11.
The control panel keys are not available for Windows ® 3.1x.
Before you can use the Scan keys on the control panel, you must have
connected the copier/printer to your Windows ® based PC and loaded the
appropriate Brother Drivers for your version of Windows ® . When you are
ready to use the Scan keys, make sure the Brother Control Center
application is running on your PC. (For details about how to configure the
Brother Control Center buttons to launch the application of your choice
using the Scan keys, see Chapter 7, “Using the Brother Control Panel.”)
Scan Image
You can scan a color picture into your graphics application (such as
PhotoShop or Corel) for viewing and editing.
1 Place your original in the ADF or
on the scanner glass.
2 Press Scan Image . S C A N N I N G : I M A G E
1 0 0 %
The copier/scanner will scan the
original and send a color image to
your graphics application.