Brother DCP1200 - Manual (Page 28)

A S S E M B L Y 2 - 8
Initial Setup
The Menu key enables you to customize settings. Press Menu repeatedly
until you see the option you want to select.
Setting the Beeper Volume
You can set the beeper to LOW, HIGH or OFF. The default setting is
LOW. When the beeper is set to LOW or HIGH, the copier/printer beeps
every time you press a key or make an error.
1 Press Menu until you see 1.INITIAL SETUP. 1 . I N I T I A L S E T U P
1 0 0 %
2 Press 1 on the numeric keys to select it.
3 Press Menu until you see 1.BEEPER.
1 . B E E P E R
1 0 0 %
4 Press 1 on the numeric keys to select it.
5 Press a numeric key to select the option
1 . O F F 2 . L O W 3 . H I G H
1 0 0 %
you want.
6 Press Stop to exit.
Setting the Sleep Mode
Setting the Sleep Mode reduces power consumption while the machine is
idle. You can choose how long the machine is idle (from 00 to 99 minutes)
before it drops into sleep mode. The timer automatically resets when the
machine receives a fax or PC data, or makes a copy. The default setting is
05 minutes.
1 Press Menu until you see 1.INITIAL SETUP.
2 Press 1 on the numeric keys to select it.
3 Press Menu until you see 2.SLEEP MODE. 2 . S L E E P M O D E
1 0 0 %
4 Press 2 on the numeric keys to select it.
5 Press the numeric keys to enter the amount of time the copier/printer is
idle before it drops into sleep mode (00 to 99 minutes).
6 Press Stop to exit.
If you make copies frequently, avoid constant machine warmup by
increasing the idle time in sleep mode.