Brother DCP1200 - Manual (Page 18)

G E T T I N G T O K N O W Y O U R D I G I T A L C O P I E R P R I N T E R 1 - 4
Inserting Originals for Copying
(and Scanning)
You can copy and scan from either the ADF (Automatic Document Feeder)
or from the scanner glass.
Using the ADF (Automatic Document Feeder)
The automatic document feeder (ADF) can hold up to 50 pages, feeding
each one individually through the machine. Use standard (20 lb/75g/m
2 )
paper when using the ADF. Always fan the pages well and stagger them.
Temperature: 68
°
F – 86
°
F (20
°
C – 30
°
C)
Humidity: 50% – 70%
Paper: Xerox 4200 (20LB/LTR),
Xerox 4024 (24LB/LTR),
DO NOT use curled, wrinkled, folded, or ripped paper, or paper with
staples, paper clips, paste or tape attached. DO NOT use cardboard,
newspaper, or fabric. (To copy or scan this kind of document, see Using the
Scanner Glass, page 1-5.)
■ Make sure documents written with ink are completely dry.
■ Originals must be from
Original
is Face Up
in the ADF
Document
Stopper
5.8 to 8.5 inches wide, and
from 5 to 14 inches long.
1 Insert original face up,
top edge first.
2 Adjust the paper guides
to fit the width of your
pages.
3 Stagger multiple pages.
Then place them in the
ADF, until you feel the
first page lightly touch
the feed roller.
4 Pull up the document stopper.