Brother DCP1200 - Manual (Page 29)

A S S E M B L Y 2 - 9
Setting the Print Density
You can adjust print density, making your printed originals lighter or
darker.
1 Press Menu until you see 1.INITIAL SETUP.
2 Press 1 on the numeric keys to select it.
3 Press Menu until you see 3.PRINT DENSITY.
3 . P R I N T D E N S I T Y
1 0 0 %
4 Press 3 on the numeric keys to select it.
5 Press a numeric key to select the option
1 . L O W 2 . M I D 3 . H I G H
1 0 0 % you want.
6 Press Stop to exit.
Toner Save
You can conserve toner with this feature. When you set Toner Save to ON,
print appears somewhat lighter. The default setting is OFF.
1 Press
Menu
until you see 1.INITIAL SETUP.
2 Press 1 on the numeric keys to select it.
3 Press Menu until you see 4.TONER SAVE. 4 . T O N E R S A V E
1 0 0 %
4 Press 4 on the numeric keys to select it.
5 Press a numeric key to select the option
1 . O N 2 . O F F
1 0 0 % you want.
6 Press Stop to exit.
Checking the Drum Life
You can see the percentage of the drum’s life that remains available.
1 Press Menu until you see 1.INITIAL SETUP.
2 Press 1 on the numeric keys to select it.
3 Press Menu until you see 5.DRUM LIFE.
5 . D R U M L I F E
1 0 0 %
4 Press 5 on the numeric keys to select it.
5 Press Stop to exit.
Even if the remaining drum life is 0%, you may continue to use the drum
unit until you have a print quality problem.