BNC 835-3 Programmer Manual - Manual (Page 8)

generator and then send or receive information using predefined commands. Communication is
interactive: one command at a time. The telnet service is available on port 18.
Once a telnet session to the device is established, the echo can be enabled by typing
SYST:COMM:SOCK:ECHO ON
Following this command a prompt “>>” should become visible.
Internet Browser
The BNC MODEL 835-3 hosts a web-server (firmware 2.1 upwards) that allows you to remotely
perform basic control of the device platform independent from any current web-browsers.
To connect to your 835-3 via a web browser, the device must exist within the LAN and the
(dynamic) IP must be known. It can be accessed by typing the IP into the browser’s URL
window.
PARAMETER DEFAULT
Host Name:
BNC MODEL 835-3
IP Address DHCP-acquired. If DHCP absent, assigned via Auto-IP (169.254.5.5)
Subnet Mask DHCP-acquired. If DHCP absent, assigned via Auto-IP
Gateway 0.0.0.0
DNS Server 0.0.0.0
Listening Port 9221
User ID admin
Password 835-3
Ping Echo On