BNC 835-3 Programmer Manual - Manual (Page 34)

Berkeley Nucleonics
www.Berkeley Nucleonics.com
835-3
Programmer’s Manual v1.0
Page 34 of 37
:QUEStionable?
:STATus:QUEStionable [:EVENt]?
This query returns the contents of the questionable status event register and clears it.
:QUEStionable:CONDition?
:STATus:QUEStionable:CONDition?
This query returns the contents of the questionable status condition register.
:QUEStionable:ENABle
:STATus:QUEStionable:ENABle
This command sets the enable mask of the questionable status event register.
:QUEStionable:PTR
:STATus:QUEStionable:PTR
This command sets the positive transition filter of the questionable status event register.
:QUEStionable:NTR
:STATus:QUEStionable:NTR
This command sets the negative transition filter of the questionable status event register.
:SYSTem Subsystem
Command Parameters Unit
(default)
Remark
:SYSTem:ERRor[:NEXT]?
:SYSTem:PRESet Firmware 2.216
:SYSTem:VERSion?
:SYSTem:LOCK
:SYSTem:LOCK:RELease Firmware 2.216
:ERRor?
:SYSTem:ERRor[:NEXT]?
Return Parameters: Integer error number
Query command is a request for the next entry in the instrument’s error queue. Error
messages in the queue contain an integer in the range [–32768, 32768] denoting an
error code and associated descriptive text.
:PRESet
:SYSTem:PRESet
Resets most signal generator functions to factory- defined conditions. This command is
similar to the *RST command.
:VERSion?
:SYSTem:VERSion?
Returns the SCPI version number that the instrument software complies with [1999.0]
:LOCK
:SYSTem:LOCK
Locks (disables) front panel control.
:LOCK:RELease