BNC 835-3 Programmer Manual - Manual (Page 35)

Berkeley Nucleonics
www.Berkeley Nucleonics.com
835-3
Programmer’s Manual v1.0
Page 35 of 37
:SYSTem:LOCK:RELease
Unlocks (enables) front panel control.
[:SYSTem:COMMunicate] Subsystem
Command Parameters Unit
(default)
:SYSTem:COMMunicate:LAN:CONFig DHCP|MANual|AUTO DHCP
:SYSTem:COMMunicate:LAN:DEFaults
:SYSTem:COMMunicate:LAN:DHCP:TIMeout 30 sec
:SYSTem:COMMunicate:LAN:DOMain
:SYSTem:COMMunicate:LAN:DNS:DYNamic ON|OFF|1|0
:SYSTem:COMMunicate:LAN:DNS:OVERride ON|OFF|1|0
:SYSTem:COMMunicate:LAN:DNS[:SERVer]
:SYSTem:COMMunicate:LAN:GATeway “0.0.0.0”
:SYSTem:COMMunicate:LAN:HOSTname
:SYSTem:COMMunicate:LAN:IDENtify ON|OFF|1|0
:SYSTem:COMMunicate:LAN:IP
:SYSTem:COMMunicate:LAN:KEEP:TIMeout
:SYSTem:COMMunicate:LAN:RESTart
:SYSTem:COMMunicate:LAN:SUBNet “255.255.2
55.0”
:SYSTem:COMMunicate:SOCKet[]:ECHO ON|OFF|1|0 OFF
:LAN:CONFig
:SYSTem:COMMunicate:LAN:CONFig DHCP|MANual|AUTO
:SYSTem:COMMunicate:LAN:CONFig?
This command sets the signal generator’s internet protocol (IP) address.
MANual
The user assigns an IP address to the signal generator.
DHCP The network assigns an IP address to the signal generator. If DHCP fails,
manual configuration will be used.
AUTO The network assigns an IP address to the signal generator with a fallback
to Auto- IP if DHCP fails. If both DHCP and Auto- IP fail, manual
configuration will be used.
:LAN:DEFaults
:SYSTem:COMMunicate:LAN:DEFaults
This command restores the instrument’s LAN settings to their factory default values.
:LAN:DESCription (not implemented)
:SYSTem:COMMunicate:LAN:DESCription
:SYSTem:COMMunicate:LAN:DESCription?
This command defines the instrument’s web description. The query returns the current
saved setting.
:LAN:DHCP:TIMeout (not implemented)
:SYSTem:COMMunicate:LAN:DHCP:TIMeout {30}|60|90|120sec
:SYSTem:COMMunicate:LAN:DHCP:TIMeout?