BMW K 1100 LT/RS - Manual (Page 48)

11.14
Removing clutch housing
• Install the retaining device (arrow),
BMW No. 11 2 800, in the position illustrated.
• Unscrew hex nut (1) and take off thrust ring (2).
• Push O-ring (3) forwards with the clutch housing
and remove with a hook.
• Pull out clutch housing (4), noting the presence
of thrust washer (5).
1 2 3 4 5
LT110090
LT110100
11 2 800
• If necessary, pull the clutch housing off with a
three-arm puller, BMW No. 33 1 830.
• Remove the intermediate flange.
LT110110
33 1 830