BMW K 1100 LT/RS - Manual (Page 140)

16.8
Removing and installing fuel pump
• Remove and empty fuel tank.
• Remove filler neck.
• Release electrical connections (1/2) at the fuel
pump.
• Release hose clips (3/4) and detach lines.
• Compress clips (arrows) on retaining ring and
pull out pump.
• Pull filter (5) off pump.
• Pull off rubber-metal connection (6) together with
retaining ring.
• Install in the reverse order of removal.
L
Note:
The rubber-metal unit must be felt to engage on the
fuel pump.
Note position of marking on rubber-metal unit and
filter with respect to each other.
Electrical connections:
Yellow
= +, M 4 connection thread
Black = –, M 5 connection thread
The positive pole of the fuel pump must face oppo-
site the positive marking on the retaining ring.
Install pump such that both markings are located on
the left-hand side of the motorcycle.
LT160040
2
6
1
4
3
5