BMW K 1100 LT/RS - Manual (Page 151)

17.9
Removing and installing coolant
hoses
• Remove fuel tank.
• [RS] Remove bottom section of fairing .
• Remove left/right side fairings.
• Remove corresponding coolant hose.
• Remove radiator in order to release connections
on coolant filler neck (1).
L
Note:
Before screwing back in, clean the thread of micro-
encapsulated screw (2) and secure it with
Loctite 243.
X
Tightening torques:
Coolant filler neck to cylinder head (2) ........... 9 Nm
Temperature sensor to coolant filler neck (3) 30 Nm
LT170080
3
2
1