Black Box LRA005A-R2 - Manual (Page 224)

ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL
224
ip status
Displays the IP statistics such as total packets, number of bad packets, etc.
ip ttl [hops]
Sets or displays the IP time-to-live value placed in each outgoing IP packet.
hops—The default value for hops is 255.
4.8 ipx
Change to IPX mode
Syntax
ipx [ipx_command param...]
Description
When in TCP/IP mode, use the ipx command to enter IPX mode. The Router is always in one of two
modes, and the prompt always indicates the current mode:
• (ipx)Router> Router is in IPX mode
• (tcp/ip)Router> Router is in TCP/IP mode
The protocol mode is set per-session. Individually logged-in users can have different modes set.
Depending upon what mode it is in, the Router software selects the command set and help/usage strings
available to the user for the current mode (protocol).
The user can also execute a command from a different mode by prefixing the command with the mode.
Example
For example, to display the IPX routing table while in TCP/IP mode, at the prompt enter
(tcp/ip)Router> ipx route
This command will switch to the IPX mode, execute the route command, and then return to the
TCP/IP mode.
4.9 netstat
Display network statistics
Syntax
netstat [-a] [-s] [-r] [-m]
Description
Use the netstat command to display the contents of various network-related data structures in various
formats, depending upon the options you select.
Subcommands and parameters
-a—Show the state of all active sockets. The display for each active socket shows the local and remote
address, the send and receive queue sizes in bytes, the protocol, and the internal state of the
protocol.