Black Box LRA005A-R2 - Manual (Page 145)

ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL
145
version Display Router’s software version number
who Display information about logged-in users
1.4 IPX-only Commands
filter add name { [-i iface[/frame_type]]
[-s src_addr ]
[-d dest_addr]
[-p pkt_type] }
-t {allow | deny | nodial}
[-f {inbound | outbound}]
[-o {before | after} existing_name]
filter delete name
filter {enable | disable}
filter flush
filter move name [{before | after} existing_name]
filter status
Configure/display IPX filters
ifconfig [iface[/frame_type] [network net_number] [{up | down}] ]
ifconfig iface [speed [bps]]
Configure interface for IPX
ifconfig [iface [linkaddr directory_number [/SPID] ] ] Configure interface to assign isdn
address and distinguishes between
multipoint and point-to-point
connection via SPID assignment
ipx broadcast
ipx internal_net [internal_net_number]
ipx optimize [on | off]
ipx priority
ipx routing [{enable | disable}]
ipx spx
ipx trace
Display/configure IPX protocol parameters
netstat [-m] [-p {ipx | rip | sap | pburst}] [-s] Display IPX network statistics
ping server_name Send diagnostic packets to test operation
ping router_name of remote Routers, clients or servers
ping network.node_address
ping -s {server_name | router_name | network.node_address} [count ]
ripfilter add name
{ [-i iface [/frame_type] ]
[-q query_type]
[-n network] }
-t {allow | deny | nodial}
[-f {inbound | outbound}]
[-o {before | after} existing_name]
[-h {hopcount}]
ripfilter delete name
ripfilter {enable | disable}
ripfilter flush
ripfilter move name [{before | after} existing_name]
ripfilter status
Configure/display RIP filters