Black Box LRA005A-R2 - Manual (Page 20)

ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER USER’S MANUAL
20
Place the Router on a shelf or tabletop and follow these steps. The step numbers coincide with the
cables in the illustration.
1. Using either a 10BASE-T or AUI cable, connect your Ethernet LAN to the appropriate connector.
2. Connect the LINE port (modem0) to the desired telephone line. This telephone line must be
dedicated and cannot be used for any other purpose.
3. Connect the power supply with a power cord. Do not start the Router at this time.
4. Proceed to Chapter 4.