Black Box LRA005A-R2 - Manual (Page 174)

ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL
174
Total in and out: 6 pps Total async load = 0 cps
Max context switch latency = 1 ticks
Where
ifOutOctets Number of bytes transmitted
rawsndcnt Number of packets sent
ifOutUcastPkts Number of Unicast (non-broadcast) packets
ifOutNUcastPkts Number of broadcast packets
ifInOctets Bytes received
rawrecvcnt Packets received
ifInUcastPkts Unicast packets received
ifInNUcastPkts Broadcast packets received
Dialer state Idle/dialing/called_in/called_out
Modem speed Should be called port speed
Line load The higher of in or out as a percentage of port speed
2.18 ppp
Displays the current status of the point-to-point protocol (PPP) on a specific interface. Configures an
interface’s various levels of protocol negotiation to support a PPP connection between local and remote
peers as defined by RFC 1661.
Syntax
Interface status
ppp i&g_iface
Compression method selection
ppp i&g_iface ccp {local | remote} method [stacker | history num | none | allow [on | off]]
LCP negotiation
ppp iface lcp {local | remote} accm [bitmap | allow [on | off]]
ppp iface lcp {local | remote} authentication [chap | pap | none | allow [on | off]]
ppp iface lcp {local | remote} acfc [on | off | allow [on | off]]
ppp iface lcp {local | remote} pfc [on | off | allow [on | off]]
ppp iface lcp {local | remote} magic [on | off |value | allow [on | off]]
ppp iface lcp {local | remote} mru [size | allow [on | off]]
ppp iface lcp {local | remote} default
ppp iface lcp timeout [seconds]
IPCP negotiation
ppp i&g_iface ipcp {local | remote} address [on | off | allow [on | off]]
ppp i&g_iface ipcp {local | remote} compress [tcp slots [flag] | none | allow [on | off]]
IPXCP negotiation