Philips Pronto Home Theater Control Panel TSU3500 - Manual (Page 56)

User Guide
56
How do I reset Pronto?
Normally, resetting Pronto is not necessary. However, if Pronto’s touch screen
freezes or if you notice unusual behavior, you need to perform a reset to get Pronto
running again.
1 Press the latch on the battery cover with your thumb and then slide the
cover forward firmly.
2 Lift off the battery cover.
You can find the Reset button in the battery compartment.
FAQ
3 Use an unfolded paperclip or a sharp
pencil to carefully press the Reset
button.
Pronto restarts.
Pronto beeps twice to indicate
it is ready for use.
4 Set the time again. See ‘Changing the Time’ on page 14 for more
information.
Note If you reset Pronto, all personal changes like saved and programmed commands,
IR codes, timers and macros are retained.
Why does a device respond to some RF signals and not to others?
Not all commands for all devices work properly with RF signals.
If a device does not respond properly to RF signals sent out by Pronto, you have to
reconfigure Pronto to operate the device with IR signals.
Reset button
ProntoNG_0705_ML_1EN.qxd 22-08-2005 10:57 Pagina 56