Philips Pronto Home Theater Control Panel TSU3500 - Manual (Page 49)

User Guide
49
EN
Using the Power Features
To set the cursor navigation:
1 Tap and hold the Pronto icon in the upper left corner of the touch
screen for 3 seconds. The Tools Menu appears.
2 Select the .
The first Settings Page appears.
3 Press the Page Down hard button at the left side of the Pronto.
The second Settings Page appears.
4 Tap in the second Settings Page.
The cursor navigation is enabled. The Toggle hard button is activated.
5 Tap the Pronto icon in the top center of the touch screen to exit the
Settings Tool.
To use the cursor for navigating the Pronto:
6 Press the Left and Right buttons of the cursor.
Pronto navigates through the devices.
7 Press the Up and Down buttons of the cursor.
Pronto navigates through the pages.
8 Press the Toggle button to easily switch from navigating on
Pronto to control audio/video equipment.
The Device Left and Device Right buttons appear in the top area of the
touch screen and the cursor is used for controlling audio/video equipment.
9 Press the Toggle hard button again to switch back to cursor navigation.
ProntoNG_0705_ML_1EN.qxd 22-08-2005 10:57 Pagina 49